SGS 6 Litre Oil-Less Direct Drive Air Compressor & Spray Gun Kit – 5.7CFM, 1.5HP

This SGS 6 litre portable oil-less air compressor comes complete with a professional spray gun, air regulator, 10m hose, spray gun cleaning kit and euro quick release couplers. It is also ideal for DIY and trade applications such as tyre inflation, nailing, stapling and sanding thanks to it’s 6L capacity, high flow 5.7 CFM air displacement and 8 bar maximum working pressure. It offers a fantastic combination of performance, safety and value for money.

	The powerful 1.5 HP motor is capable of delivering up to 5.7 CFM.
	The 6 litre tank is ideal for nailing, stapling, sanding, drilling, grinding and cutting.
	Boasting a quick-connect air outlet, pressure regulator and gauge.

Please note this compressor is for semi-pro and not commercial use.

Included:
6L air compressor  SC6H
HVLP 1000ml Aluminium Gravity Fed Spray Gun SAT502
10m long 8mm diameter Rubber Hose With Quick Couplers SHR15-8
Mini Inline Air Filter & Water Trap SA10F
Euro quick coupler SAF5

The powerful 1.5 HP engine ensures a short wait for the tank to pressurise – keeping you working.

Fitted with safety valve and pressure regulator with a gauge for controlled air pressure. Fitted with a Euro quick release connector.

SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety.

This compressor is fitted with a standard 13A UK plug.

Engine Size: 1.5 HP
Power Consumption: 1.1 kW
Voltage: 230 V @ 50 Hz
Rated Speed: 2850 rpm
Air Displacement: 5.7 CFM
Sound Level: 80 dB
Discharge Pressure: 115 PSI / 8 bar
Tank Capacity: 6 litres
Air Outlet: 1/4″ BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.

Size
Dimensions: (L) 485 x (W) 265 x (H) 550 mm Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.