SGS 150 Litre Air Compressor – 14CFM 3HP 150L | With FREE Oil

The SGS 150 litre air compressor is is a must for professional workshops, garages and enthusiasts alike. Extremely effective thanks to it’s large 150L capacity coupled with a very high 14cfm air displacement. Using the long life highly efficient, smooth and quiet operating 14cfm, twin cylinder belt drive compressor pump, the compressor works up to a maximum working pressure of 150 PSI.

SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety

This compressor comes with FREE bottle of Oil!

Benefits:
Fully automatic stop/start control
Air Pump Displacement
Twin Cylinder oil lubricated
Motor 3HP Induction
230v single phase
Air receiver
Fitted air outlet
Pressure Regulator
Fitted with 2 Uni Quick fit couplers

Specifications:
Air Receiver Volume: 150 Litre
Air Displacement: 14 CFM
Max. Working Pressure: 10 BAR / 150 PSI
Horse Power: 3 HP
Wattage: 2,200 Watts
Input Voltage: 230V
Oil Lubricated
Floor Mounted
Air Outlets: 2
Dimensions: 1400 x 475 x 890mm

This machine uses an industrially rated induction motor and must be operated from a heavy duty power supply and not from extension cables. We recommend at a minimum a 16 amp or higher power supply.

Please Note: This compressor is able to run from a normal 13 amp socket, however only on some installations. Because suitable conditions cannot be guaranteed we recommend a dedicated 30 or preferably 45 amp supply which will accommodate the motor starting current of 2 to 3 times the full load current of some 6,500 watts.
Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.