SGS 50 Litre Direct Drive Air Compressor – 9.6CFM 2.5HP 50L

Here at SGS Engineering, all of our air compressors are hand built to the highest standard by our expert engineers, European CE marked, and German GS certified for product safety, to provide you with top-quality performance every time.

Our 50 litre high flow reciprocating air compressor has the capacity and delivery to ensure you always get superb results, and can work safely with control thanks to the fitted safety valve and pressure regulators. Whether you’re spray-painting, inflating tyres or operating air tools, this 50 litre model offers excellent performance and great value for money.

	The powerful 2.5 HP motor is capable of delivering up to 9.6 CFM.
	The 50 litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
	Boasting twin outlets, this compressor can have two tools connected to it at once.

Please note this compressor is for semi-pro and not commercial use. The compressor is shipped with oil but may require additional oil before first use.

SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety

Specifications:

This compressor is fitted with a standard 13A UK plug.
Engine Size: 2.5 HP
Power Consumption: 1.5 kW
Voltage: 230 V @ 50 Hz
Rated Speed: 2850 rpm
Current: 7.5 A
Air Displacement: 9.6 CFM
Sound Level: 97dB
Discharge Pressure: 115 PSI / 8 bar
Restart Pressure: 70 PSI / 4.8 bar
Tank Capacity: 50 litres
Air Outlet: 1/4″ BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.
Dimensions: (L) 700 x (W) 390 x (H) 710 mm

Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.