SGS 50 Litre Direct Drive Air Compressor With Starter Kit – 14.6CFM 3.0HP 50L

NEW powerful reciprocating air compressor from SGS has 50-litre tank and twin air outlets for increased versatility. It is ideal for workshop, DIY and trade applications such as spray-painting, impact wrenches, sanding, drilling, cutting, nailing and grinding thanks to its impressive 50L capacity coupled with a high air displacement of 14.6 CFM. It offers a fantastic combination of performance, safety and value for money.

	The powerful 3 HP motor is capable of delivering up to 14.6 CFM.
	The 50 litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
	Boasting twin outlets, this compressor can have two tools connected to it at once.

Included:

50L air compressor
10m long 8mm diameter Rubber Hose With Quick Couplers
Compressor oil – Air line oil
Euro quick couplers

The large air tank makes this compressor suitable for tools that require a constant supply of air, such as spray guns, impact wrenches and drills. The powerful 3 HP engine ensures a short wait for the tank to pressurise – keeping you working. Fitted with safety valve and pressure regulator with gauges for controlled air pressure. Twin air outlets for increased versatility allow two air-lines / tools to be connected at the same time. Fitted with euro quick release connectors.

SGS is a British company; our air compressors are hand-built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety. Parts, spares and consumables such as oil and air filters are available from SGS. The compressor is shipped with oil but may require additional oil before first use. This compressor is fitted with a standard 13A UK plug.

Please note this compressor is for semi-pro and not commercial use.

Specifications: 

Engine Size: 3.0 HP
Power Consumption: 2.2 kW
Voltage: 230 V @ 50 Hz
Rated Speed: 2850 rpm
Current: 10 A
Air Displacement: 14.6 CFM
Sound Level: 97dB
Discharge Pressure: 115 PSI / 8 bar
Restart Pressure: 80 PSI / 0.55MPa
Tank Capacity: 50 litres
Air Outlet: 1/4″ BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.
Dimensions: (L) 750 x (W) 380 x (H) 770 mm

Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.