SGS 50 Litre Direct Drive V-Twin High Power Air Compressor With Tool Kit – 14.6CFM 3.0HP 50L

NEW powerful reciprocating air compressor from SGS has 50 litre tank and twin air outlets for increased versatility. It is ideal for workshop, DIY and trade applications and thanks to it’s impressive 50L capacity it offers a fantastic combination of performance, safety and value for money.

	The powerful 3 HP motor is capable of delivering up to 14.6 CFM.
	The 50 litre tank is ideal for spraying, nailing, stapling, sanding, drilling and cutting.
	Boasting twin outlets, this compressor can have two tools connected to it at once.

The large air tank makes this compressor suitable for tools that require a constant supply of air, such as spray guns, impact wrenches and drills. The powerful 3 HP engine ensures a short wait for the tank to pressurise – keeping you working.

SGS are a British company with full spares, warranty and service centre based in our East Midlands HQ. Our air compressors are hand built by our expert engineers to the highest standard of quality and are European CE marked and German GS certified for product safety. The compressor is shipped with oil but may require additional oil before first use. This compressor is fitted with a standard 13A UK plug.

Please note this compressor is for semi-pro and not commercial use.

Specifications

Engine Size: 3.0 HP
Power Consumption: 2.2 kW
Voltage: 230 V @ 50 Hz
Rated Speed: 2850 rpm
Current: 10 A
Air Displacement: 14.6 CFM
Sound Level: 97dB
Discharge Pressure: 115 PSI / 8 bar
Restart Pressure: 80 PSI / 0.55MPa
Tank Capacity: 50 litres
Air Outlet: 1/4″ BSP to Euro Coupler. The fitting can be swapped for PCL fittings, please check Fitting & Couplers section.
Dimensions: (L) 750 x (W) 380 x (H) 770 mm

Covered by a 2 year extended warranty.

Due to a change in EU legislation the safety valve rings have been removed by ALL manufacturers of air compressors. This is due to the ring being incorrectly used to vent the compressor, causing undue wear which should not be present on a safety device. The air should drained from the tank via the valve on the belly of the tank. This location is used so that the water is drained at the same time.

SGS 5 piece 1/4″ BSP air tool kit complete with:

Tyre inflator with pressure gauge
This inflator reads in bar & psi and has a maximum working pressure of 8 bar. It is suitable for inflating most tyres on motor vehicles, bicycles, etc. The gauge has a tough rubber moulding.

Air blow gun
With an 8 bar maximum working pressure, use this blow gun for displacing dust, wood shavings, swarf, metal filings, etc. Use a lower pressure when cleaning dust from electronic components.

4 metre spiral air hose
Fitted with 1/4″ BSP female couplings, this recoil style hose connects all the other items in the tool kit to your compressor.

Oil spray gun with suction cup
With a capacity of 0.9 litre and maximum working pressure of 3.5 bar, this spay gun is ideal for spraying things like paraffin, engine de-greaser, creosote and insecticide.

Paint spray gun
This professional style spray gun has a 0.6 litre gravity fed cup and a 4 bar maximum working pressure. Fitted with a 1.5mm nozzle, the gun is ideal for spraying almost any type of conventional paint. The airflow through the air cap draws paint into the nozzle assembly, where it is atomised and sprayed forward. The spray gun requires 4.5-8CFM and air pressure of 45psi.
Covered by a 2 year extended warranty.